Antistatic and ESD flooring in Kanpur

Kanpur has a long association with defence manufacturing, and a network of suppliers has grown around it. Some of these units handle propellants, pyrotechnics or other materials where a static spark is a safety hazard. The city also has electrical manufacturers, research institutions and a large hospital sector. Each needs static control for a different reason, and the right floor for one can be wrong for another.

Areas with explosive or flammable materials

Where explosives, propellants, pyrotechnic compositions or flammable solvent vapours are present, static discharge from a person or trolley can cause ignition. These areas typically use conductive flooring with a low resistance to earth, combined with conductive footwear, so charge drains away almost immediately.

Requirements in these facilities are set by the relevant safety regulations and the facility's own hazard assessment. We don't guess the specification. We ask for the required resistance range and any other conditions, such as a spark-free floor surface, and build and test to match.

A few practical points about these floors:

• The floor must stay conductive for its whole life, so the surface is chosen to resist wear in traffic routes.
• Earthing connections are critical and must be checked by your electrical team.
• Testing is done at handover, and the facility should retest regularly.
• Metal fittings, drains and door frames in the room need their own bonding.

Electrical and electronics manufacturing

Kanpur's electrical goods and electronics units need static dissipative floors in areas where boards and components are handled. These floors have a higher resistance range, usually 10⁶ to 10⁹ ohms, designed to protect electronics rather than prevent ignition. Using a conductive floor in an electronics room isn't automatically better. It can be the wrong specification, so the distinction matters.

Research and teaching labs

University and institute labs working with electronics, materials or instrumentation use ESD floors at their benches and instrument areas. We plan these jobs around academic calendars.

Hospitals

Operation theatres and ICUs in Kanpur's hospitals often have specifications calling for antistatic floors, along with jointless coved finishes for infection control.

How the floor is built

The layers are similar for conductive and dissipative floors, but the materials and target resistance differ:

1. Slab preparation, repair and priming
2. Copper tape grid connected to earthing points
3. Conductive primer across the area
4. Conductive or dissipative finish, epoxy or PU
5. Earthing connection by your electrician
6. Resistance testing, with readings handed over

FAQs

Should an explosives handling room have a conductive or dissipative floor?

Areas with explosives or flammable vapours usually require conductive flooring. The exact range must come from your facility's regulations and hazard assessment.

Can you provide test readings for safety inspections?

Yes. We test resistance at handover and give you the readings. Regular retesting should be part of your facility's safety procedures.

Does the floor need special footwear?

Yes. Conductive or ESD footwear is essential. Without it, the floor can't drain charge from people.

Call +91-8755475716 or fill in the form below to discuss your requirements in Kanpur. More details are on our antistatic ESD flooring page.