For a small home garage, a parking spot or a storeroom, bringing in a flooring contractor isn't always worth it. The labour cost on a small area can be higher than the material. That's why Kaizen Flooring & Developers supplies DIY epoxy floor paints: products you can apply yourself with a brush or roller, in the colour you want. This page explains the options, how to apply them, and when a professional system is the better choice.
Types of DIY floor paint we offer
| Type | What it means | Best for |
|---|
| Single-component (1K) | Ready to use, no mixing | Beginners, light-use areas, quick refresh |
| Two-component (2K) | Resin and hardener mixed before use | Tougher, longer-lasting finish in garages and workshops |
| Water-based | Low odour, easier clean-up | Indoor areas in homes, rooms next to living spaces |
| Solvent-based | Stronger smell, needs ventilation | Harder-wearing areas where odour isn't a concern |
All of them are available in a wide range of colours, and we can customise the colour to suit your space.
Where DIY floor paint makes sense
- home garages and car porches
- parking spots under houses
- storerooms, utility rooms and small workshops
- balconies and covered sit-outs, where the right product is chosen for sun exposure
- small shop back rooms
For factories, warehouses, commercial kitchens, hospitals or large areas, a professionally installed system such as epoxy flooring or PU concrete lasts much longer and is usually worth the labour cost.
How to apply DIY epoxy floor paint
- Check the floor. It should be solid concrete, not crumbling or damp. Paint won't hold on a wet or powdery surface.
- Clean thoroughly. Remove loose paint, dust, oil and grease. Oil patches in garages need a degreaser, and badly soaked spots may need to be scraped or ground.
- Repair. Fill cracks and holes so the finish looks even.
- Mix, for two-component products. Mix resin and hardener exactly in the ratio printed on the container. Mix small quantities at a time, because mixed material starts to set and can go jelly-like if left too long.
- Apply. Paint evenly with a brush for edges and a roller for the main area. Apply the recommended number of coats and follow the recoat times on the container.
- Cure. Leave it to cure for at least 8 hours before walking on it lightly, and ideally 24 hours before normal use. Cars and heavy items need longer, and cold weather slows curing.
Tips for a better result
- Test moisture. Tape a plastic sheet to the floor overnight. If the underside is wet in the morning, the floor is too damp to paint.
- Watch the weather. Avoid very hot afternoons and damp or cold days.
- Ventilate. Keep windows and doors open, especially with solvent-based products.
- Don't rush. Most DIY problems come from poor cleaning or skipping recoat times.
- Expect wear. DIY paints are thinner than professional systems. Busy spots such as under car tyres may need touch-ups over time.
When to call a professional instead
- the floor is large, heavily used or carries forklifts
- there is oil soaked deep into the concrete
- the slab is damp or water comes through the floor
- the area gets hot water, steam or chemicals
- you need anti-slip texture, coves or a seamless hygienic finish
We're happy to advise either way. Sometimes DIY is the sensible choice, and sometimes it isn't.
FAQs
How long before I can walk on a DIY painted floor?
Light foot traffic after at least 8 hours, and normal use after about 24 hours, depending on temperature.
Which type should I choose for my home garage?
For durability, a two-component product. If you want the simplest application and low odour, a water-based or single-component product.
Can I paint over old paint?
Only if the old paint is firmly stuck. Loose or flaking paint must be removed first.
Can you match a specific colour?
Yes, we can customise colours on request.
Call +91-8755475716 to order DIY floor paints or ask which product suits your floor.