Phone: +91-8755475716
Free site visit anywhere in India. No obligation.
+91-8755475716 WhatsApp Us Send EnquiryEpoxy cementitious flooring is a three-component system made from epoxy resin, a hardener and a cement-based powder. It is trowelled or spread onto concrete, usually 2 to 6 mm thick, and cures into a dense, hard, grey surface. Its big advantage is moisture tolerance. Because it contains cement as well as epoxy, it bonds to concrete that is too damp or too young for ordinary epoxy and PU floors. That makes it a problem-solver in many buildings.
As a finished floor. In plant rooms, stores, basements, service areas and moderately wet areas, the grey, matt, hard-wearing surface is often all that's needed. It handles washing, moderate spills and trolleys.
As a moisture barrier. On damp or new slabs, it goes down first as a base, and once cured, an epoxy, PU or self levelling finish is applied on top. This lets resin floors go down safely where they would otherwise blister.
| Situation | How epoxy cementitious helps |
|---|---|
| Old epoxy blistering on a damp ground floor | Bonds to damp concrete, carries a new topcoat |
| New plant with a young slab and a production deadline | Can go down earlier than pure resin floors, within manufacturer limits |
| Basements with residual moisture | Tough floor or moisture-tolerant base |
| Uneven, pitted old floors | Levels and repairs before a finish |
| Wash areas on a budget | Washable, moderately heat tolerant, costs less than PU concrete |
| Point | Epoxy cementitious | Standard epoxy | PU concrete |
|---|---|---|---|
| Tolerance to damp slabs | Good | Poor | Good |
| Appearance | Grey, matt | Many colours, gloss | Matt, textured |
| Heat tolerance | Moderate | Low | High |
| Chemical resistance | Moderate | Good | Good |
| Typical cost | Lower to moderate | Lower | Higher |
Most resin floor failures in north India are caused by damp slabs. Long monsoons, high groundwater, basements and fast-track construction all leave moisture in concrete. Testing moisture before choosing a system, and using epoxy cementitious where readings are high, prevents most of these failures.
Chandigarh, Baddi, Delhi, Dehradun, Uttarakhand, Punjab, Lucknow, Kanpur, Agra, Bareilly, Ambala
Many systems can go on younger concrete than pure resin floors, within the manufacturer's limits. We test the slab and check the product data.
Colour options are limited, mostly grey. A resin topcoat can add colour.
In most cases, yes, when used as a base under the new topcoat on a slab where moisture is the cause.
For prep areas and wash-up with moderate heat, yes. Cooking lines with steam and boiling water need PU concrete.
Call +91-8755475716 or fill in the form below to book a site survey.