Epoxy cementitious flooring in Ambala Sadar

Not every floor needs the most expensive system. Many small businesses in Ambala, including dairies, sweet shops, bakeries, workshops and stores, just need a floor that is sound, washable and doesn't break up every year. Epoxy cementitious flooring often fits that brief well. It costs less than PU concrete, handles damp and washing better than paint or plain epoxy, and can level out old pitted floors.

What makes it different

It is made from three parts: epoxy resin, hardener and a cement-based powder. The epoxy gives it strength and bond, and the cement part makes it tolerant of moisture in the slab. The result is a hard, grey, matt surface around 2 to 6 mm thick.

Dairy and sweet shop wash areas

Milk and sweet businesses in Ambala Sadar often have wash areas with worn floors: cement washed away, aggregate showing, water collecting in hollows. Tiles in these areas crack and lose grout. An epoxy cementitious floor:

• fills and levels the hollows
• gives a sealed, washable surface
• handles daily washing and moderate spills
• can be sloped slightly towards drains

For areas with boiling milk, steam or heavy utensils, PU concrete lasts longer. We'll explain the difference in cost and life so you can decide.

Workshops and stores

Older workshops and stores often have pitted, patched floors that make trolley movement difficult and collect dirt. Epoxy cementitious mortar repairs and levels these floors and can serve as the finished surface. If you want a coloured floor, a coating can be added on top later.

Damp ground floors

Ground floors in older Ambala buildings sometimes stay damp, especially after the monsoon. A normal epoxy coating on such a slab can blister. Epoxy cementitious systems are much more tolerant of moisture, so they are a safer choice for these floors, either on their own or as a base under a topcoat.

Keeping costs sensible

We try to match the system to what each area needs:

1. Wash areas and wet zones: epoxy cementitious, or PU concrete for very hot or heavy use
2. Dry stores and workshops: epoxy cementitious or a concrete densifier
3. Front-of-shop or display areas: a decorative coating over a prepared base

Doing this saves money compared with putting one expensive system everywhere.

How we lay it

The floor is inspected, cleaned and mechanically prepared. Loose material is removed, cracks are filled and deep hollows are pre-filled. The epoxy cementitious material is mixed and laid, with falls towards drains where needed. Small areas can often be completed in a day or two, plus curing time.

FAQs

Is it cheaper than PU concrete?

Usually yes. It is a good middle option for wet areas that don't face very hot liquids or heavy impact.

Can it be laid in a shop without closing for long?

Small areas can often be done over a weekend or holiday, with foot traffic returning after curing.

Does it come in colours?

Colour options are limited, mostly grey. For a colour, a coating can be applied on top.

Call +91-8755475716 or fill in the form below to book a visit in Ambala. More details are on our epoxy cementitious flooring page.