PU self levelling flooring in Delhi

Most flooring work in Delhi happens inside buildings that can't close. Hospitals keep running, stores stay open until late and offices need their floors back on Monday. PU self levelling flooring suits these jobs well. It can be laid in phases, it takes foot traffic within about a day, and the finished floor is jointless, quiet and easy to maintain.

Common uses in Delhi

Hospitals and nursing homes. Wards, ICUs, labs and corridors need a floor with no grout lines or seams that can be disinfected repeatedly. We run the floor up the wall as a cove so there is no dirty corner.

Diagnostic and pathology labs. A sealed floor that handles spills and doesn't shed dust onto samples.

Retail stores and showrooms. Stores in malls and high streets use self levelling PU for a clean, modern look that handles heavy footfall and display changes.

Offices and co-working spaces. Plain grey or white floors with a satin finish, comfortable underfoot and quieter than tiles.

Light industrial units. Clean assembly and packing rooms in Okhla, Mayapuri and Naraina.

Working at night and on weekends

For stores and offices, we usually work after closing time. A typical sequence for a small store looks like this:

• Night one: remove the old floor finish, grind, repair and prime
• Night two: pour and level the PU
• Day three: the floor takes foot traffic; displays go back after the full cure time we specify

Larger spaces are divided into zones. Hospitals are planned ward by ward with the facility team, using low-odour materials.

Delhi-specific issues we plan for

Basement moisture. Many Delhi buildings have basements used as stores, clinics or gyms, and basement slabs are often damp. Poured floors over wet slabs blister. We test moisture before quoting and use moisture-tolerant primers or a barrier layer where needed.

Existing stone floors. Older buildings often have kota stone, marble or terrazzo. These can usually be overlaid after grinding, which avoids noisy demolition in an occupied building.

Dust and pollution. In winter, fine dust in the air can settle on a fresh floor. We keep the room sealed during the pour and the first hours of curing.

Access and building rules. Many commercial buildings restrict work hours, noise and material movement. We agree these with building management before the job starts.

How the floor is laid

After a survey and moisture test, the existing surface is ground and repaired. Coves are formed where needed. The floor is primed, and the self levelling PU is poured to 2 to 4 mm, spread and rolled to release air. A satin or matt topcoat is applied last.

FAQs

Can you finish a small retail store over a weekend?

For a small store with a sound existing floor, often yes. We confirm after seeing the floor, because repairs and moisture can add time.

Is PU self levelling flooring suitable for a gym?

For general gym floors, yes. Under heavy free weights, rubber mats are still recommended to protect the floor from dropped weights.

Can you lay it over existing tiles in a clinic?

If the tiles are firmly bonded, yes. We grind, fill the joints and prime before pouring. Loose tiles have to be removed first.

Call +91-8755475716 or fill in the form below to arrange a site survey in Delhi. More details are on our PU self levelling flooring page.