Agra's hotels and guest houses depend on keeping rooms available through the tourist season. Floor renovations in corridors and service areas have to happen around guests, often at night, and without strong chemical smells drifting into rooms. Our epoxy-PU hybrid WB, the water-based version of our EPU hybrid, gives a tough, washable coating with low odour. It is also colour stable, which matters in bright lobbies and corridors with windows.

Hotels and guest houses

Typical areas include:

  1. guest corridors and lift lobbies, coated section by section
  2. staff corridors, stores and laundries
  3. restaurant dining areas and breakfast rooms
  4. spa and gym changing areas, with anti-slip texture

The coating resists yellowing better than standard epoxy, so light colours in sunny corridors stay consistent.

Showrooms and commercial spaces

Handicraft, marble inlay and textile showrooms in Agra want floors that look good, handle foot traffic and can be redone without closing for long. The water-based hybrid suits these spaces, and can be finished in gloss or satin.

Working with Agra's heat

Summer affects water-based coatings in the opposite way to the monsoon. Hot, dry air makes water evaporate very quickly, which shortens working time and can leave marks where coats overlap. In summer we:

  • work at night or early morning when it's cooler
  • keep materials out of the sun
  • work in smaller sections so each coat blends properly
  • avoid coating directly in strong sunlight near windows

In the monsoon, drying slows instead, so we add ventilation and time. October to March is the most comfortable period.

Where a different system is better

Looking after the finish

A coated corridor stays good-looking for longer with a simple routine. Use entrance mats at doors from the street, because Agra's dust acts like fine sandpaper under shoes. Mop with a neutral cleaner rather than harsh acidic or strongly alkaline products. Fit felt pads under chairs and luggage racks. If a heavy trolley gouges the surface, get it touched up early. Small repairs with the same water-based system blend in well and can usually be done overnight.

Over existing marble and tiles

Many Agra hotels have marble or tiled floors. Where these are well bonded, we lightly grind the surface, fill grout lines and apply the coating. Loose or cracked sections are replaced or repaired first so they don't crack through the new finish.

FAQs

Can a hotel corridor be coated overnight?

Yes, section by section. Each section is prepared and coated at night and reopened in the morning, with further coats the next night if needed.

Will the coating yellow in sunny corridors?

The hybrid resists yellowing much better than standard epoxy, especially with a UV-stable topcoat.

Is summer a problem for water-based coatings?

Hot, dry conditions shorten working time, so we work at night and in smaller sections.

Call +91-8755475716 or fill in the form below to plan work in Agra. More details are on our epoxy-PU hybrid flooring (WB) page.

Get a Free Quote in Agra

Share a few details and our team will call you back within 24 hours. Prefer to talk now? Call +91-8755475716.