Epoxy flooring in Gajraula

Gajraula, in Amroha district on the highway between Delhi and Moradabad, has an industrial area with a strong chemical and pharmaceutical presence, along with manufacturing units and warehouses. In chemical and pharma plants, floors face a wider range of conditions than in most factories. The same site might have dust-sensitive packing halls, wash areas with hot water and process areas handling acids and solvents. Epoxy flooring is part of the answer, but specifying it correctly for each area is what makes it last.

Floors in a chemical or pharma plant

Standard epoxy resists many everyday spills, but it isn't designed for strong acids, some chlorinated solvents or hot chemical exposure. Using it in those areas leads to early failure. We ask for your chemical list before recommending anything for process zones.

Warehouses on the highway

Warehouses along the Delhi–Moradabad highway serve the wider region. They need dust control, resistance to forklift traffic and clear marking. An epoxy screed or EPU hybrid holds up best on forklift routes and near dock doors.

Preparing floors in chemical plants

Floors in running chemical plants are often contaminated. Before any new system is laid:

1. chemically contaminated concrete is broken out and neutralised
2. oil and solvent-soaked areas are removed
3. cracks and joints are repaired
4. slab moisture is tested
5. the surface is ground or shot blasted

Contamination left in the concrete will attack the new floor from below.

Safety during installation

Work inside chemical and pharma plants follows the site's permit and safety rules. We coordinate with your EHS team on:

• hot work and ignition sources near solvent areas
• ventilation during coating
• isolating work areas from running processes
• waste handling and disposal

Planning the job

Gajraula is within reach of our base, and we plan surveys and installations to fit your shutdown windows. Larger plants are usually done in phases, one area at a time.

FAQs

Can standard epoxy be used in our process area?

Only if the chemicals are mild. For acids, solvents or hot chemicals, a chemical resistant system is needed. We check your chemical list first.

Do you provide product data for EHS review?

Yes. We provide product data sheets and safety data for your review before work starts.

Can floors be done without stopping the whole plant?

Usually, by working area by area during planned shutdowns.

Call +91-8755475716 or fill in the form below with details of your site. More details are on our epoxy flooring page.